4A Zeolite Flash Dryer

4A zeolite is a chemical substance. It is a non-toxic, odorless, tasteless, and fluid white powder with strong calcium ion exchange capacity and no pollution to the environment. It is an ideal phosphorus-free detergent additive to replace sodium tripolyphosphate. It has a strong surface adsorption capacity and is an ideal adsorbent and desiccant.

Equipment Description:
4A zeolite flash dryer is a drying equipment that has been continuously improved and upgraded based on many years of application and practice. It is scientific, reasonable, energy-saving, and efficient. During the drying work, the hot air enters the bottom of the drying chamber tangentially, and the agitator continuously drives it to form a strong rotating wind field; the wet material is added to the drying chamber through the spiral feeder, and is strongly affected by the high-speed rotating stirring paddle, so that the wet material is dispersed under the action of impact, friction and shear force, and the block and agglomerate materials are quickly crushed and fully contacted with the heated air for mass transfer and heat transfer. 4A zeolite with low moisture content and small particle size rises to the separator with the rotating airflow for gas-solid separation. The finished 4A zeolite can be collected and packaged, and the tail gas is discharged after being treated by the dust removal device. It is environmentally friendly, efficient and economical.

Equipment advantages:
1. A feeding device can be selected, and the feeding is continuous and stable without bridging.
2. A special cooling device is installed at the bottom of the equipment to prevent the material from deteriorating in the high-temperature area at the bottom.
3. The equipment has a special air pressure sealing device and a bearing cooling device, which effectively prolongs the service life of the transmission part.
4. The equipment adopts a special air distribution device to reduce resistance and balance the wind speed in the tower.
5. The drying chamber is equipped with a grading ring and a swirling sheet, and the material fineness and final moisture are adjustable and controllable.
6. The circumferential air velocity in the drying chamber is high, and the material residence time is short, which effectively prevents the material from sticking to the wall and the deterioration of heat-sensitive materials.